One of my favorite fishing trips is to the north coast of California for rock cod, and one of my favorite ways to prepare it is with a deep fish fryer. The problem is you have to catch it before you can cook it, and thats why I like fishing for rock cod. If you can get your boat in the water, and you know where the reef is, you are going to catch fish. Its just that simple. And a fresh catch along with a deep fish fryer, combine to make a delicious meal.

After all, one of the reasons we fish is to put food on the table. After spending a day on the water, and the time and effort to clean and prep your catch, a tasty meal of deep fried rock cod is a nice reward.

When selecting your deep fryer, the first choice you have to make is, electric or gas. If you’re like me and do a lot of outdoor cooking with no electricity available, your only choice is a propane burner. My favorite is the Bayou Classic fish cookers. They are well built, portable propane burners, and easy to use.

To prepare your rock cod for the deep fryer you will want to fillet them. You will have to cut out the rib cage and check for any other bones you may have missed. Then cut your fillets into 2″ strips. Keeping your pieces of fish approximately the same size, helps ensure that all are properly cooked.

Next, you need to coat your fish. You can use a batter or coat it with egg and breadcrumbs. I generally prefer a beer batter, but, it comes down to personal preference. Just make sure you do coat it. This helps keep the oil out and the moisture in.

Make sure you use a vegetable oil with a high smoking point. I generally use peanut oil, but canola oil or soybean oil will work as well. You need to pre-heat the oil to 350-375 degrees F. You don’t want it to fall much under 350 degrees , or the oil will soak through the batter making the fish taste greasy.

When cooked at the proper temperature, your batter will be a crispy golden brown and the cod will be moist and delicious. So, make sure you have a quality thermometer with your deep fish fryer. If not, you can drop a small piece of bread in the hot oil, if it turns golden brown within 45-60 seconds, the oil temperature is fine.Don’t overload your fryer, as this will lower the oil temperature. Just fry 3 to 6 pieces of fish at a time, depending on the size of your fryer.

And now, it’s time to eat, and there are a variety of tasty ways to consume your deep fried rock cod. It tastes great all by itself, or dip it in your favorite sauce. One of my all time favorites is fish tacos. Whether you like a crispy shell or a soft shell, deep fried cod fits very well in either, and makes for a delicious meal.

So, if you like catching fish, give California rock cod a try. Just remember, you need to know where the reefs are, so make sure you get some local knowledge. Oh yea, and don’t forget your deep fish fryer.

Cooking with offset smokers, also called barrel smokers, can be a fun and rewarding experience. Offset smokers have a separate firebox attached to the cooking chamber which allows for direct grilling in the firebox, and direct or indirect cooking in the smoking chamber. When mastered, the indirect cooking method turns out fantastic barbecue, smoked meats, poultry, and fish. The secret of the indirect cooking method lies in the ability to maintain an even cooking temperature over a long period of time. For the novice, this can be a difficult and frustrating skill to learn. This article offers some basic tips that will help you become master of your offset smoker.

When buying an offset smoker, one of your main considerations should be the thickness of the steel. Thin gauge steel does not retain heat very well. This makes it more difficult to maintain a consistent cooking temperature. Also, the temperature near the firebox can be hotter than at the other end of the cooking chamber. The thinner the steel, the more pronounced this heat difference will be, and you may have to rotate your meat fairly often. You can still cook exceptional barbecue and smoked meats with a thin gauge steel smoker, it just takes a bit more work. My choice is the Bayou Classic offset smokers. They are built to last with heavy 10-gauge steel and 1200 degree heat resistant paint.

No matter which offset smoker you choose, the key to low and slow cooking is to maintain a consistent cooking temperature. To do that, you need to get a feel for how your particular smoker cooks. It takes practice, a little experimentation, and a lot of patience. Here are a few simple tips to help you get started.

*Season your smoker. Its really a simple process, just like seasoning a cast iron skillet only on a larger scale. First, coat the inside of your smoking chamber with cooking oil. Any type will do, so dont use anything expensive. Next, build a fire in the firebox and add wood chips for smoke. Maintain the temperature at 250 to 275 degrees F and let it go for two or three hours adding chips for smoke when needed. Its that simple. The oil and smoke will create a barrier on the inside of you smoker and protect it from rust. This is also an important step for the simple fact that it gives you a dry run on your new smoker.

*Use coals for your fire not wood. Charcoal burns at a consistent pace, and is much easier to control than wood. Once youve mastered the charcoal fire, go ahead and experiment with wood if youd like. But until then, do yourself a favor, cook with charcoal and add wood chips for smoke.

*Pre heat the cooking chamber to the desired cooking temperature.

*Keep the lid closed. You cannot maintain an even cooking temperature if you keep opening the lid. If you are cooking a lot of meat and are using all the grill space, you may need to open it occasionally to rotate the meat away from the firebox. Otherwise, keep the lid closed.

*When adding coals, use a charcoal chimney to pre start them prior to adding them to the fire. Adding unlit coals will cool your fire and you dont want that.

*Dont soak your wood chips. Wet wood chips can cool your fire. Again, you want your fire to burn as consistently as possible.
Clean the ashes in the firebox and the grease from the cooking chamber. You should get in the habit of doing this after every use. Just scrape out the ashes and grease. You dont want them building up in your barrel smoker, they can trap water and cause rust.

Well, thanks for reading and I hope these tips help. Go grab a beer, or a glass of wine and fire up that offset smoker. But don’t drink too much, you have to pay close attention to that fire.